Với tốc độ lên đến 867Mbps trên băng tần 5GHz, RG-EST350 V2 đảm bảo truyền tải dữ liệu mượt mà, không giật lag, đáp ứng tốt nhu cầu sử dụng băng thông cao.
Ăng ten định hướng tích hợp với độ lợi 15dBi giúp tăng cường khả năng phát và thu sóng, cho phép kết nối xa đến 5km mà vẫn duy trì được tín hiệu ổn định.
Hỗ trợ cả kết nối điểm - điểm và điểm - đa điểm, cho phép bạn xây dựng mạng lưới kết nối linh hoạt, phù hợp với nhiều mô hình ứng dụng khác nhau.
Với chuẩn bảo vệ IP65, RG-EST350 V2 có khả năng chống bụi và chống nước hiệu quả, hoạt động ổn định trong mọi điều kiện thời tiết ngoài trời.
Dịch vụ Ruijie Cloud miễn phí giúp bạn cấu hình, quản lý và giám sát thiết bị một cách nhanh chóng và dễ dàng, tiết kiệm thời gian và công sức.
Tích hợp khả năng chống sét lên đến 4KV, giúp bảo vệ thiết bị khỏi các tác động của sét đánh, đảm bảo hoạt động liên tục và ổn định.
| Model | RG-EST350 V2 |
|---|---|
| Hardware | |
| RAM/ Flash | 512 MB/8 MB |
| Radio | Dual-stream single-band 2×2 |
| Operating Band | 802.11a/n/ac: 5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.850GHz (country specific) |
| Antenna | Directional antennas, 15 dBi |
| Polarization | Horizontal: 31°, Vertical: 14° |
| Bridging Distance | 5 km (recommended) |
| Spatial Streams | Two streams |
| Maximum Throughput | Up to 867 Mbps at 5 GHz |
| Transmit Power | ≤400 Mw (26 dBm) (adjustable) |
| Dimensions | 230 (D)×132 (W)×48 (H) mm (Dimensions per device) |
| Weight | 0.5 kg |
| Ports | Two 10/100/1000Base-T Ethernet ports, supports 24 VDC non-standard PoE power supply One DC port, supports 12 VDC power supply |
| Hardware Button | 1 reset button |
| Status Indicators | System indicator: 1 Port indicator: 2 Bridge signal strength indicators: 3 |
| Power Supply | Support 12 VDC power supply and 24 VDC non-standard PoE power supply |
| Power Consumption | ≤10W |
| Environment | Operating temperature: -30°C to 65°C Storage temperature: -40°C to 85°C Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing) |
| Installation | Wall-mounted/ Pole-mounted (hose clamp is provided) |
| IP Rating | IP65 |
| Lightning Protection | 4 KV |
| Radio Standard | EN300 328, EN301 893 |
| Software Features | |
| Automatic Bridging | Support The recorder-end and camera-end are automatically paired for bridging by default |
| One-to-many Bridging | One-to-three bridging is recommended for the wireless coverage scope at an |
| Device Configuration and Management | angle of 31° to the horizontal. Support App/Web configuration |
| QR Code Login | Users can log in to the device configuration interface by scanning the QR code of the device using the app |
| Self-healing | Automatic restart upon equipment failure |
| Automatic Channel Adjustment | Automatically adjust the channel upon power-on |
| Model | RG-EST350 V2 |
|---|---|
| Hardware | |
| RAM/ Flash | 512 MB/8 MB |
| Radio | Dual-stream single-band 2×2 |
| Operating Band | 802.11a/n/ac: 5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.850GHz (country specific) |
| Antenna | Directional antennas, 15 dBi |
| Polarization | Horizontal: 31°, Vertical: 14° |
| Bridging Distance | 5 km (recommended) |
| Spatial Streams | Two streams |
| Maximum Throughput | Up to 867 Mbps at 5 GHz |
| Transmit Power | ≤400 Mw (26 dBm) (adjustable) |
| Dimensions | 230 (D)×132 (W)×48 (H) mm (Dimensions per device) |
| Weight | 0.5 kg |
| Ports | Two 10/100/1000Base-T Ethernet ports, supports 24 VDC non-standard PoE power supply One DC port, supports 12 VDC power supply |
| Hardware Button | 1 reset button |
| Status Indicators | System indicator: 1 Port indicator: 2 Bridge signal strength indicators: 3 |
| Power Supply | Support 12 VDC power supply and 24 VDC non-standard PoE power supply |
| Power Consumption | ≤10W |
| Environment | Operating temperature: -30°C to 65°C Storage temperature: -40°C to 85°C Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing) |
| Installation | Wall-mounted/ Pole-mounted (hose clamp is provided) |
| IP Rating | IP65 |
| Lightning Protection | 4 KV |
| Radio Standard | EN300 328, EN301 893 |
| Software Features | |
| Automatic Bridging | Support The recorder-end and camera-end are automatically paired for bridging by default |
| One-to-many Bridging | One-to-three bridging is recommended for the wireless coverage scope at an |
| Device Configuration and Management | angle of 31° to the horizontal. Support App/Web configuration |
| QR Code Login | Users can log in to the device configuration interface by scanning the QR code of the device using the app |
| Self-healing | Automatic restart upon equipment failure |
| Automatic Channel Adjustment | Automatically adjust the channel upon power-on |