Q & A
Online support
Hotline
090 888 3630
Email
info@wi-mesh.com.vn
Với chuẩn 802.11ac Wave 2, RG-AP630(IDA2) cung cấp tốc độ truy cập lên đến 2.533Gbps, đảm bảo trải nghiệm Wi-Fi mượt mà cho nhiều người dùng đồng thời.
Vỏ bọc đạt chuẩn IP67 giúp RG-AP630(IDA2) chống chịu được bụi, nước và nhiệt độ khắc nghiệt, đảm bảo hoạt động ổn định trong mọi điều kiện thời tiết.
Khi kết hợp với bộ điều khiển không dây Ruijie RG-WS, RG-AP630(IDA2) cho phép quản lý tập trung, giúp đơn giản hóa việc cấu hình, giám sát và bảo trì hệ thống Wi-Fi.
RG-AP630(IDA2) hỗ trợ nhiều cơ chế bảo mật như WPA2, WPA-PSK, WEP và 802.1x authentication, đảm bảo an toàn cho dữ liệu và người dùng.
RG-AP630(IDA2) tích hợp sẵn ăng-ten định hướng và hỗ trợ nhiều loại ăng-ten ngoài, cho phép tùy chỉnh vùng phủ sóng Wi-Fi phù hợp với nhu cầu cụ thể.
Thiết bị hỗ trợ Remote Intelligent Perception Technology (RIPT), X-speed, Intelligent load balancing, Preference for 5GHz (band select) giúp tối ưu hóa hiệu suất và trải nghiệm người dùng.
| Model | RG-AP630(IDA2) |
|---|---|
| Target Deployments | For big campus, wireless city, harbour, storage room, mine |
| Basic Specifications | |
| Radio | Concurrent dual-radio dual-band |
| Protocol | 802.11a/b/g/n/ac Wave2 |
| Antenna | Built-in Directional Smart Antenna (support external/internal antenna switching) |
| Antenna Loba Orientation | Internal Directional: Horizontal 60 degrees, Vertical 30 degrees |
| Antenna Gain | 10dBi |
| Max Throughput | Build-in antenna model: 800Mbps@2.4G 1733Mbps@5G 2.533Gbps per AP; External antenna model: 600Mbps@2.4G 1300Mbps@5G 1.9Gbps per AP |
| Maximum Transmit Power | 27dBm |
| Adjustable Power | 1dBm |
| IP Rating | IP67 |
| Ports | |
| Service Port | One 10/100/1000Base-T Port (ETH1/PoE IN); One 10/100/1000Base-T Port (ETH2); One 1000M SFP Port (Combo Port) |
| Management Port | 1 Console Port (RJ45) |
| Power | |
| Power Supply | PoE+ (802.3at) |
| Power Consumption | <25W |
| WLAN | |
| Maximum clients per AP | Up to 512 |
| SSID capacity | Up to 16 per radio Up to 32 per AP |
| SSID hiding | Support |
| Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID | Support |
| Remote Intelligent Perception Technology (RIPT) | Support |
| X-speed | Support |
| Intelligent load balancing based on the number of users or traffic | Support |
| STA control | SSID/radio-based |
| Bandwidth control | STA/SSID/AP-based speed control |
| Preference for 5GHz (band select) | Support |
| Wireless position tracking | Support |
| Dynamic Frequency Selection (DFS) | Future Release Support |
| Security | |
| PSK, Web, and 802.1x authentication | Support |
| Data encryption | WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
| QR code authentication | Support |
| SMS authentication | Support |
| PEAP authentication | Support |
| Data frame filtering | Whitelist, static/dynamic blacklist |
| User isolation | Support |
| Rogue AP detection and countermeasure | Support |
| Dynamic ACL assignment | Support |
| WAPI | Support |
| RADIUS | Support |
| CPU Protection Policy (CPP) | Support |
| Network Foundation Protection Policy (NFPP) | Support |
| Wireless Intrusion Detection System(WIDS) | Support |
| Wireless Intrusion Prevention System (WIPS) | Support |
| Routing | |
| IPv4 address | Static IP address or DHCP reservation |
| IPv6 CAPWAP tunnel | Support |
| ICMPv6 | Support |
| IPv6 address | Manual or automatic configuration |
| Multicast | Support |
| Management and Maintenance | |
| Network management | SNMP v1/v2C/v3, Telnet, SSH, TFTP, and web management |
| Visualized wireless heat map analysis | Support (need to integrate with SNC) |
| Real-time spectrum analysis | Support (need to integrate with SNC) |
| Fault detection and alarm | Support |
| Cloud AC management | Support |
| Statistics and logs | Support |
| FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
| External Characteristics | |
| Lock | Support |
| LED Indicators | Power status and WDS signal strength |
| Relevant Standard | |
| Wi-Fi Alliance Certification | Support |
| Safety Standard | GB4943, EN/IEC 60950-1, EN/IEC 60950-22 |
| EMC Standard | GB9254-2008, EN301 489, EN55022 |
| Health Standard | EN 50385 |
| Radio Standard | FCC Part15,EN300328, EN301893 |
| Vibration Standard | GB/T 2423 |
| Specifications | |
| Dimensions (W x D x H) | 276 × 246 × 90 (mm) |
| Weight | <2.5kg |
| Work Environment | |
| Temperature | Operating Temperature: -40°C to 65°C (heater module will be enabled at -15°C) Storage Temperature: -40°C to 85°C |
| Humidity | Operating Humidity: 0% to 100% (non-condensing) Storage Humidity: 0% to 100% (non-condensing) |
| Installation Mode | Wall/pole-mount installation |
