Đảm bảo nguồn điện sạch và ổn định cho các thiết bị nhạy cảm. Loại bỏ hoàn toàn các nhiễu điện, biến động điện áp và tần số.
Đáp ứng nhu cầu bảo vệ nguồn cho nhiều thiết bị cùng lúc, từ máy chủ, thiết bị mạng đến các thiết bị quan trọng khác.
Tối ưu hóa hiệu suất sử dụng điện, giảm thiểu chi phí năng lượng và bảo vệ môi trường.
Kết nối song song lên đến 4 thiết bị, tăng cường công suất và độ tin cậy cho hệ thống.
Dễ dàng bảo trì và thay thế pin mà không cần tắt nguồn, đảm bảo hoạt động liên tục của hệ thống.
Hiển thị thông tin chi tiết về trạng thái hoạt động của UPS, giúp bạn dễ dàng theo dõi và quản lý.
Tắt nguồn khẩn cấp trong các tình huống nguy hiểm, bảo vệ an toàn cho người và thiết bị.
Quản lý và giám sát UPS từ xa, lên lịch tắt/mở, và nhận thông báo sự cố qua email.
Linh hoạt trong lắp đặt và sử dụng, phù hợp với nhiều không gian khác nhau.
Model | OLS10000ERT6UA |
---|---|
General | |
UPS Topology | Online Double Conversion |
Energy Saving Technology | Online ECO Mode Eciency > 96% |
Active PFC Compatibility | Yes |
Parallel Expansion | 4 |
Input | |
Compatible with Generators | Yes |
Nominal Input Voltage | 230VAC |
Input Voltage Range | 110 ~ 276 VAC |
Adjustable Voltage Range | 0 ~ 80% load 110 ~ 276 Vac 0 ~ 100% load 176 ~ 276 Vac |
Input Frequency | 50Hz ± 5 60Hz ± 6 |
Input Frequency Detection | Auto-sensing |
Rated Input Current | 45.5A |
Input Power Factor | 0.99 |
Input Connector Type | Hardwire Terminal Block |
Output | |
Capacity | 10000VA |
Capacity | 9000W |
On Battery Waveform | Pure Sine Wave |
On Battery Voltage | 208 ± 1% 220 ± 1% 230 ± 1% 240 ± 1% |
Output Voltage Setting | Configuration |
On Battery Frequency | 50Hz ± 0.1% 60Hz ± 0.1% |
Output Frequency Setting | Configuration |
Power Factor | 0.9 |
ECO voltage mode | ± 10% |
Overload Protection | Internal Current Limiter, Circuit Breaker, Fuse |
Overload Protection (Line Mode) | 105 ~ 125% Load for 1 min, 125 ~ 135% Load for 30 sec, 135 ~ 150% Load for 1 sec,> 150% Load Immediately |
Overload Protection (Battery Mode) | 105 ~ 125% Load for 1 min, 125 ~ 135% Load for 30 sec,> 135% Load Immediately |
Overload Protection (Bypass Mode) | 125 ~ 150% Load for 1 min, 150 ~ 170% Load for 10 sec,> 170% Load for 1 sec |
Harmonic distortion (Linear load) | THD <2% |
Harmonic distortion (Non-linear load) | THD <5% |
Bypass In | Auto Skip |
Socket (s) – Total | 1 |
Normal Switching Time | 0 |
Battery | |
Runtime at Half Load | 8 min |
Runtime at Full Load | 2.5 min |
Typical Recharge Time | 4 hours |
Maximum Charge Current | 1A |
Smart Battery Management (SBM) | Yes |
User-replaceable | No |
Battery Type | Sealed Lead-acid |
Extended Battery Module (EBM) | BPSE192V75ART3UOA |
Maximum Number of EBMs | 3 |
Surge protection & Filtering | |
Surge Suppression | 445J |
EMI/RFI Filtration | Yes |
Management & Communications | |
LCD Panel | Yes |
LCD Orientation | Rotatable LCD – via Setting |
HID Compliant USB Port(s) | 1 |
Serial Port | RS232 |
Dry Switch (with Relay) | Optional |
Emergency Power Off (EPO) Port | Yes |
Power Management Software | PowerPanel® Business (Recommended) |
SNMP/HTTP Remote Monitoring | Yes - with RMCARD205 option |
Physical | |
Form Factor | Rackmount, Tower |
Others | |
Dimensions (WxHxD) | 438 x 130.5 x 480 mm |
Weight | 14.6kg |
Installed Rack Height | 3U |
Operating Temperature | 0 ~ 40°C |
Operating Relative Humidity (Non-condensing) | 20 ~ 90% |
Online Thermal Dissipation | 2672 BTU/hr |
Model | OLS10000ERT6UA |
---|---|
General | |
UPS Topology | Online Double Conversion |
Energy Saving Technology | Online ECO Mode Eciency > 96% |
Active PFC Compatibility | Yes |
Parallel Expansion | 4 |
Input | |
Compatible with Generators | Yes |
Nominal Input Voltage | 230VAC |
Input Voltage Range | 110 ~ 276 VAC |
Adjustable Voltage Range | 0 ~ 80% load 110 ~ 276 Vac 0 ~ 100% load 176 ~ 276 Vac |
Input Frequency | 50Hz ± 5 60Hz ± 6 |
Input Frequency Detection | Auto-sensing |
Rated Input Current | 45.5A |
Input Power Factor | 0.99 |
Input Connector Type | Hardwire Terminal Block |
Output | |
Capacity | 10000VA |
Capacity | 9000W |
On Battery Waveform | Pure Sine Wave |
On Battery Voltage | 208 ± 1% 220 ± 1% 230 ± 1% 240 ± 1% |
Output Voltage Setting | Configuration |
On Battery Frequency | 50Hz ± 0.1% 60Hz ± 0.1% |
Output Frequency Setting | Configuration |
Power Factor | 0.9 |
ECO voltage mode | ± 10% |
Overload Protection | Internal Current Limiter, Circuit Breaker, Fuse |
Overload Protection (Line Mode) | 105 ~ 125% Load for 1 min, 125 ~ 135% Load for 30 sec, 135 ~ 150% Load for 1 sec,> 150% Load Immediately |
Overload Protection (Battery Mode) | 105 ~ 125% Load for 1 min, 125 ~ 135% Load for 30 sec,> 135% Load Immediately |
Overload Protection (Bypass Mode) | 125 ~ 150% Load for 1 min, 150 ~ 170% Load for 10 sec,> 170% Load for 1 sec |
Harmonic distortion (Linear load) | THD <2% |
Harmonic distortion (Non-linear load) | THD <5% |
Bypass In | Auto Skip |
Socket (s) – Total | 1 |
Normal Switching Time | 0 |
Battery | |
Runtime at Half Load | 8 min |
Runtime at Full Load | 2.5 min |
Typical Recharge Time | 4 hours |
Maximum Charge Current | 1A |
Smart Battery Management (SBM) | Yes |
User-replaceable | No |
Battery Type | Sealed Lead-acid |
Extended Battery Module (EBM) | BPSE192V75ART3UOA |
Maximum Number of EBMs | 3 |
Surge protection & Filtering | |
Surge Suppression | 445J |
EMI/RFI Filtration | Yes |
Management & Communications | |
LCD Panel | Yes |
LCD Orientation | Rotatable LCD – via Setting |
HID Compliant USB Port(s) | 1 |
Serial Port | RS232 |
Dry Switch (with Relay) | Optional |
Emergency Power Off (EPO) Port | Yes |
Power Management Software | PowerPanel® Business (Recommended) |
SNMP/HTTP Remote Monitoring | Yes - with RMCARD205 option |
Physical | |
Form Factor | Rackmount, Tower |
Others | |
Dimensions (WxHxD) | 438 x 130.5 x 480 mm |
Weight | 14.6kg |
Installed Rack Height | 3U |
Operating Temperature | 0 ~ 40°C |
Operating Relative Humidity (Non-condensing) | 20 ~ 90% |
Online Thermal Dissipation | 2672 BTU/hr |