Hỏi đáp
Tư vấn trực tuyến
Hotline
0981 811 879
Email
info@wi-mesh.com.vn
ups_network_management_card_3_apc_ap9640.jpg

UPS Network Management Card 3 APC AP9640

Nhà sản xuất:

Bộ lưu điện UPS APC

Remote monitoring and control of an individual UPS by connecting it directly to the network.

UPS Network Management Card 3 APC AP9640 là giải pháp lý tưởng cho việc quản lý và giám sát UPS (Uninterruptible Power Supply) từ xa, đảm bảo nguồn điện liên tục và ổn định cho các thiết bị quan trọng của bạn. Với khả năng kết nối trực tiếp vào mạng, sản phẩm này cho phép bạn theo dõi hiệu suất, nhận cảnh báo sự cố và điều khiển UPS một cách dễ dàng, giúp tối ưu hóa thời gian hoạt động và giảm thiểu rủi ro mất dữ liệu do cúp điện.

Tính năng nổi bật

Giám sát và điều khiển từ xa

Quản lý UPS của bạn mọi lúc mọi nơi thông qua kết nối mạng, giúp bạn kiểm soát tình hình nguồn điện một cách chủ động.

Tích hợp dễ dàng với hệ thống quản lý hiện có

Hỗ trợ BACnet/IP, Modbus TCP và SNMP, giúp tích hợp với các hệ thống quản lý tòa nhà (BMS) và hệ thống quản lý mạng (NMS) một cách liền mạch.

Bảo mật cao

Sử dụng các giao thức bảo mật HTTPS/SSL, SSH và SNMPv3 để bảo vệ dữ liệu và ngăn chặn truy cập trái phép.

Cập nhật firmware từ xa

Dễ dàng cập nhật firmware cho UPS thông qua giao diện web, giúp bạn luôn có được những tính năng mới nhất và bảo mật tốt nhất.

Hỗ trợ Gigabit Ethernet

Đảm bảo tốc độ truyền dữ liệu nhanh chóng và ổn định với kết nối Gigabit Ethernet.

Hỗ trợ IPv6

Tương thích với giao thức IPv6, đáp ứng các yêu cầu của mạng hiện đại.

Hỗ trợ Console qua Micro-USB

Gỡ rối và cấu hình dễ dàng hơn với cổng console Micro-USB.

Thông số kỹ thuật

BACnet/IP SupportSupports reporting UPS information to Building Management Systems or other third party management systems via BACnet/IP (BTL certified) (Single Phase Smart-UPS only)
Command line interfaceOffers simultaneous remote management access through Telnet and SSH
Compatible with SmartSlot enabled UPSsCompatible with Smart-UPS
Device EncryptionSecurely connect via HTTPS/SSL, SSH (up to 2048-bit encryption), SNMPv3
Gigabit Ethernet SupportSupports faster Communication at 1 Gbps (Gigabit per second) over Network.
IPv6 SupportCapable of operating on a network using IPv6 protocol
Micro-USB based Console SupportFor faster and easier Troubleshooting and Configuration.
Modbus TCP SupportSupports reporting UPS information to Building Management Systems or other third party management systems via Modbus TCP
Multiple language supportWeb browser interface available in English, French, Russian, Chinese, Japanese, Korean, German, Italian, Spanish, Portuguese
Multiple user accessSupports simultaneous web browser access for up to 8 users and network command line interface access for up to 3 users
Root of Trust SupportSupports Secure Boot with Root of Trust for enhanced Security
Smart Battery Management SupportDetailed battery information including battery cartridge parameters provides early-warning fault analysis to simplify management of the entire battery system (SRT Smart-UPS only)
Standard UPS RFC 1628 MIB CompatibleMake UPS information available to your preferred network, server or enterprise management system by forwarding SNMP traps (events) using RFC 1628 MIB
UPS Firmware UpdateUser friendly mechanism to remotely and seamlessly update UPS firmware via the web browser interface (SMX, SMT and SRT Smart-UPS only)
Enterprise management system compatibleMake device information available to your preferred enterprise management system by forwarding SNMP traps (events) across SNMPv1 and SNMPv3 using the PowerNet MIB
NotificationBe notified of problems to ensure crucial situations are dealt with in a timely manner.
Integrates with StruxureWare Data Center ExpertAn IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Event loggingPinpoint the timing and sequence of events leading up to an incident with the event log
Data loggingIdentify problematic trends before they escalate or export the data log for analysis.
Scheduled shutdown and rebootCustomize shut down and reboot of connected equipment and UPSs
Password SecurityUser-selectable password with strong password rules and reset password mechanism
Network ShutdownReliable network-based shutdown of multiple servers
Radius supportUse an existing radius server to securely authenticate, authorize, and account for your APC device
Multi-tier user accessSupports up to four access levels - Administrator, Device User, Read-Only User and Network-only User - with user name and password requirements
Reboot equipment remotelySaves dispatching technicians to remote locations
Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP
Browser AccessibleView the user interface with a browser. Provides quick access from anywhere on a secure network
AuthenticationRadius
Dimension (Height x Width x Depth)38x121x114 mm
Net Weight0.08 kg
Operating Temperature0 - 45°C
Operating Relative Humidity0 - 95%
Operating Elevation0-3048meters
Storage Temperature-5 - 45 °C
Storage Relative Humidity0 - 95 %
Storage Elevation0 - 15240meters

Sản Phẩm Liên Quan