Hỏi đáp
Tư vấn trực tuyến
Hotline
0981 811 879
Email
info@wi-mesh.com.vn
ups_network_management_card_3_apc_ap9641.jpg

UPS Network Management Card 3 APC AP9641

Nhà sản xuất:

Bộ lưu điện UPS APC

- UPS Network Management Card 3 with Environmental Monitoring. - Remote monitoring and control of an individual UPS by connecting it directly to the network.

Bạn đang tìm kiếm một giải pháp quản lý UPS hiệu quả và an toàn? UPS Network Management Card 3 APC AP9641 chính là sự lựa chọn hoàn hảo. Với khả năng kết nối trực tiếp vào mạng, sản phẩm này cho phép bạn giám sát và điều khiển UPS từ xa, đảm bảo hệ thống của bạn luôn hoạt động ổn định.

Tính năng nổi bật

Giám sát và điều khiển từ xa

Dễ dàng theo dõi và điều khiển UPS thông qua mạng, giúp bạn quản lý hệ thống một cách hiệu quả, ngay cả khi bạn không ở gần.

Hỗ trợ BACnet/IP và Modbus TCP

Tích hợp dễ dàng với các hệ thống quản lý tòa nhà (BMS) thông qua BACnet/IP (chứng nhận BTL) và Modbus TCP, cho phép bạn tập trung quản lý năng lượng và cơ sở hạ tầng.

Bảo mật cao

Kết nối an toàn qua HTTPS/SSL, SSH (mã hóa lên đến 2048-bit), SNMPv3, đảm bảo dữ liệu của bạn luôn được bảo vệ.

Khả năng mở rộng

Hỗ trợ cảm biến nhiệt độ, cảm biến nhiệt độ và độ ẩm, cũng như phụ kiện Dry Contact I/O, giúp bạn mở rộng khả năng giám sát môi trường.

Hỗ trợ Gigabit Ethernet

Tốc độ truyền dữ liệu nhanh hơn với Gigabit Ethernet (1 Gbps).

Hỗ trợ IPv6

Hoạt động trên mạng sử dụng giao thức IPv6.

Hỗ trợ Console Micro-USB

Gỡ rối và cấu hình nhanh chóng và dễ dàng hơn.

Quản lý pin thông minh

Thông tin chi tiết về pin, bao gồm các thông số của hộp pin, giúp bạn phân tích lỗi sớm và quản lý toàn bộ hệ thống pin một cách đơn giản (chỉ dành cho SRT Smart-UPS).

Cập nhật Firmware UPS

Cơ chế thân thiện với người dùng để cập nhật firmware UPS từ xa và liền mạch thông qua giao diện trình duyệt web (chỉ dành cho SMX, SMT và SRT Smart-UPS).

Thông số kỹ thuật

BACnet/IP SupportSupports reporting UPS information to Building Management Systems or other third party management systems via BACnet/IP (BTL certified) (Single Phase Smart-UPS only)
Command line interfaceOffers simultaneous remote management access through Telnet and SSH
Compatible with SmartSlot enabled UPSsCompatible with Smart-UPS
Device EncryptionSecurely connect via HTTPS/SSL, SSH (up to 2048-bit encryption), SNMPv3
Expandable Input and Output PortsSupports the Temperature Sensor, Temperature and Humidity Sensor and Dry Contact I/O Accessory
Gigabit Ethernet SupportSupports faster Communication at 1 Gbps (Gigabit per second) over Network.
IPv6 SupportCapable of operating on a network using IPv6 protocol
Micro-USB based Console SupportFor faster and easier Troubleshooting and Configuration.
Modbus TCP SupportSupports reporting UPS information to Building Management Systems or other third party management systems via Modbus TCP
Multiple language supportWeb browser interface available in English, French, Russian, Chinese, Japanese, Korean, German, Italian, Spanish, Portuguese
Multiple user accessSupports simultaneous web browser access for up to 8 users and network command line interface access for up to 3 users
Root of Trust SupportSupports Secure Boot with Root of Trust for enhanced Security
Smart Battery Management SupportDetailed battery information including battery cartridge parameters provides early-warning fault analysis to simplify management of the entire battery system (SRT Smart-UPS only)
Standard UPS RFC 1628 MIB CompatibleMake UPS information available to your preferred network, server or enterprise management system by forwarding SNMP traps (events) using RFC 1628 MIB
UPS Firmware UpdateUser friendly mechanism to remotely and seamlessly update UPS firmware via the web browser interface (SMX, SMT and SRT Smart-UPS only)
Enterprise management system compatibleMake device information available to your preferred enterprise management system by forwarding SNMP traps (events) across SNMPv1 and SNMPv3 using the PowerNet MIB
NotificationBe notified of problems to ensure crucial situations are dealt with in a timely manner.
Integrates with StruxureWare Data Center ExpertAn IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Event loggingPinpoint the timing and sequence of events leading up to an incident with the event log
Data loggingIdentify problematic trends before they escalate or export the data log for analysis.
Scheduled shutdown and rebootCustomize shut down and reboot of connected equipment and UPSs
Password SecurityUser-selectable password with strong password rules and reset password mechanism
Network ShutdownReliable network-based shutdown of multiple servers
Radius supportUse an existing radius server to securely authenticate, authorize, and account for your APC device
Multi-tier user accessSupports up to four access levels - Administrator, Device User, Read-Only User and Network-only User - with user name and password requirements
Reboot equipment remotelySaves dispatching technicians to remote locations
Remote device managementEnable management of your UPS by connecting it directly to the network
Fault notificationReal-time event notification minimizes response times to critical physical infrastructure situations. Enables IT Administrators to reduce mean time to repair, improve efficiency, and maximize uptime.
Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP
Browser AccessibleView the user interface with a browser. Provides quick access from anywhere on a secure network
AuthenticationRadius
Dimension (Height x Width x Depth)38x121x114 mm
Net Weight0.09 kg
Operating Temperature0 - 45°C
Operating Relative Humidity0 - 95%
Operating Elevation0-3048meters
Storage Temperature-5 - 45 °C
Storage Relative Humidity0 - 95 %
Storage Elevation0 - 15240meters

Sản Phẩm Liên Quan