Hỏi đáp
Tư vấn trực tuyến
Hotline
0981.811.879
Email
info@wi-mesh.com.vn
26port_gigabit_smart_switch_cisco_sg22026k9eu.jpg

26-Port Gigabit Smart Switch CISCO SG220-26-K9-EU

Nhà sản xuất:

Cisco

26 ports 10/100/1000 + 2 Gigabit RJ45/SFP combo port. Performance: Switching capacity 52 Gbps, Forwarding rate 38.69 mpps wire-speed performance. Layer 2: Port grouping up to 8 groups, up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation.

Thiết bị chuyển mạch Cisco SG220-26-K9-EU là giải pháp lý tưởng cho các doanh nghiệp nhỏ và vừa đang tìm kiếm một switch Gigabit hiệu suất cao, dễ quản lý và bảo mật. Với 26 cổng Gigabit Ethernet và 2 cổng combo RJ45/SFP, switch này cung cấp đủ khả năng kết nối cho các thiết bị mạng của bạn, đồng thời hỗ trợ các tính năng nâng cao như QoS, VLAN và bảo mật để tối ưu hóa hiệu suất và bảo vệ mạng của bạn.

Tính năng nổi bật

Hiệu suất Gigabit mạnh mẽ

Cung cấp 26 cổng Gigabit Ethernet cho tốc độ truyền dữ liệu nhanh chóng và ổn định, đáp ứng nhu cầu băng thông cao của các ứng dụng hiện đại.

Khả năng mở rộng linh hoạt

Với 2 cổng combo RJ45/SFP, bạn có thể dễ dàng kết nối switch với các thiết bị mạng khác thông qua cáp quang hoặc cáp đồng, tăng cường khả năng mở rộng và linh hoạt cho mạng của bạn.

Quản lý thông minh

Giao diện quản lý web trực quan giúp bạn dễ dàng cấu hình, giám sát và khắc phục sự cố mạng, tiết kiệm thời gian và công sức.

Bảo mật nâng cao

Hỗ trợ các tính năng bảo mật như ACL, Port Security và 802.1X để bảo vệ mạng của bạn khỏi các mối đe dọa tiềm ẩn.

Chất lượng dịch vụ (QoS)

Ưu tiên lưu lượng truy cập quan trọng như thoại và video để đảm bảo trải nghiệm người dùng tốt nhất.

Thông số kỹ thuật

ModelSG220-26-K9-EU
Performance
Switching capacity and forwarding rateCapacity in Millions of Packets per Second (mpps) (64-byte packets): 38.69 Switching Capacity in Gigabits per Second (Gbps): 52
Jumbo framesFrame sizes up to 9216 supported
MAC tableUp to 8192 MAC addresses
Total system ports26 Gigabit Ethernet
RJ-45 ports24 Gigabit Ethernet
Uplink ports2 Gigabit Ethernet combo
Layer 2 Switching
Spanning Tree Protocol (STP)Standard 802.1d STP support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Port groupingSupport for IEEE 802.3ad Link Aggregation Control Protocol (LACP): Up to 8 groups, Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLANSupport for up to 256 VLANs simultaneously Port-based and 802.1Q tag-based VLANs Management VLAN Guest VLAN
Auto voice VLANVoice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
QinQ VLANVLANs transparently cross a service provider network while isolating traffic among customers
Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)Protocols for automatically propagating and configuring VLANs in a bridged domain
Head-Of-Line (HOL) blockingHOL blocking prevention
Loopback detectionLoopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP.
Automatic Media-Dependent Interface Crossover (MDIX)Automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed.
Security
ACLsDrop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag Support up to 512 rules
Port securityCreates the ability to lock source MAC addresses to ports; limits the number of learned MAC addresses
IEEE 802.1X (authenticator role)802.1X: RADIUS authentication; guest VLAN;
RADIUS, TACACS+Supports RADIUS and TACACS authentication; switch functions as a client
MAC address filteringSupported
Storm controlBroadcast, multicast, and unknown unicast
DoS protectionDOS attack prevention
STP Bridge Protocol Data Unit (BPDU) GuardThis security mechanism protects the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port
Spanning Tree Loop GuardThis feature provides additional protection against Layer 2 forwarding loops (STP loops).
Secure Shell (SSH) ProtocolSSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL)SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
Quality of Service
Priority levels8 hardware queues
SchedulingStrict priority and weighted round-robin (WRR) Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS)
Class of servicePort based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ)
Rate limitingIngress policer, per VLAN and per port
Environmental
Dimensions (W x H x D)440 x 44 x 201 mm
Unit weight2.81 kg
Power100 to 240V 50 to 60 Hz, internal

Sản Phẩm Liên Quan