Với công suất 1000VA/600W, UPS APC SMC1000I-2UC đáp ứng nhu cầu bảo vệ nguồn điện cho nhiều loại thiết bị khác nhau, từ máy tính, máy chủ, thiết bị mạng đến các thiết bị điện tử quan trọng khác.
Công nghệ Line Interactive giúp UPS tự động điều chỉnh điện áp đầu ra, đảm bảo nguồn điện luôn ổn định và an toàn cho thiết bị, đồng thời tiết kiệm năng lượng.
Với thời gian lưu điện lên đến 22 phút khi tải 50%, UPS APC SMC1000I-2UC cho phép bạn có đủ thời gian để lưu dữ liệu và tắt thiết bị an toàn khi có sự cố mất điện.
Màn hình LCD hiển thị đầy đủ thông tin về trạng thái hoạt động của UPS, giúp bạn dễ dàng theo dõi và quản lý hệ thống điện.
UPS APC SMC1000I-2UC được trang bị các cổng kết nối RJ-45 Serial và USB, cho phép bạn dễ dàng kết nối và quản lý UPS từ xa.
Thiết kế Rack 2U giúp bạn dễ dàng lắp đặt UPS vào tủ rack, tiết kiệm không gian và đảm bảo tính thẩm mỹ cho hệ thống.
Model | SMC1000I-2UC |
---|---|
Output | |
Output power capacity | 600W / 1.0kVA |
Output Voltage Distortion | Less than 5% |
Nominal Output Voltage | 230V |
Output Frequency | 50/60 Hz +/- 3 Hz Sync to mains |
Other output voltages | 220V, 240V |
Topology | Line interactive |
Waveform | Sine wave |
Transfer Time | 6 ms typical: 10 ms maximum |
Output Connections | (4) IEC 320 C13 (Battery Backup) (2) IEC Jumpers (Battery Backup) |
Input | |
Nominal Input Voltage | 230V |
Input frequency | 50/60 Hz +/- 3 Hz Auto-sensing |
Input voltage range for main operations | 170 - 300 Adjustable, 180 - 287V |
Number of Power Cords | 1 |
Other Input Voltages | 220 V, 240 V |
Battery | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC124 |
Expected Battery Life | 4 ~ 6 years |
RBC Quantity | 1 |
Battery Charge Power | 72W |
Communications & Management | |
Interface Port(s) | RJ-45 Serial, USB |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery: distinctive low battery alarm: configurable delays |
Surge Protection and Filtering | |
Surge energy rating | 459Joules |
Filtering | Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 |
General | |
Dimensions (DxWxH) | 86 x 432 x 406 mm |
Weight | 20.52kg |
Rack height | 2U |
Operating Temperature | 0 ~ 40°C |
Storage Temperature | -15 ~ 45 °C |
Operating Relative Humidity | 0 - 95% (non-condensing) |
Model | SMC1000I-2UC |
---|---|
Output | |
Output power capacity | 600W / 1.0kVA |
Output Voltage Distortion | Less than 5% |
Nominal Output Voltage | 230V |
Output Frequency | 50/60 Hz +/- 3 Hz Sync to mains |
Other output voltages | 220V, 240V |
Topology | Line interactive |
Waveform | Sine wave |
Transfer Time | 6 ms typical: 10 ms maximum |
Output Connections | (4) IEC 320 C13 (Battery Backup) (2) IEC Jumpers (Battery Backup) |
Input | |
Nominal Input Voltage | 230V |
Input frequency | 50/60 Hz +/- 3 Hz Auto-sensing |
Input voltage range for main operations | 170 - 300 Adjustable, 180 - 287V |
Number of Power Cords | 1 |
Other Input Voltages | 220 V, 240 V |
Battery | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC124 |
Expected Battery Life | 4 ~ 6 years |
RBC Quantity | 1 |
Battery Charge Power | 72W |
Communications & Management | |
Interface Port(s) | RJ-45 Serial, USB |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery: distinctive low battery alarm: configurable delays |
Surge Protection and Filtering | |
Surge energy rating | 459Joules |
Filtering | Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 |
General | |
Dimensions (DxWxH) | 86 x 432 x 406 mm |
Weight | 20.52kg |
Rack height | 2U |
Operating Temperature | 0 ~ 40°C |
Storage Temperature | -15 ~ 45 °C |
Operating Relative Humidity | 0 - 95% (non-condensing) |